NPORS CAT & Genny Training N304

Our NPORS CAT and Genny Training N304 Course is designed to teach up to a maximum of 8 delegates, providing the essential knowledge needed to safely and correctly operate a Cable Avoidance Tool (CAT) along with a Signal Generator (GENNY) when tracing underground services to meet the guidance from HSG 47 for Avoiding Danger from Underground Services.

Who Should Attend

The CAT & Genny Course is intended for those who operate, supervise or manage the use of Cable Avoidance Tools and Signal Generators in the workplace to avoid the dangers of underground services. There are no prerequisites for this course, although an understanding of underground services, utility plans and cable avoidance tools are an advantage.

Since the safe use of cable avoidance tools require that delegates consult safety notices and read and thoroughly understand the manufacturer’s instruction manual, English literacy and language comprehension are important requirements for any user.

Course Programme

• The reasons for using locators
• Safety
• Plans
• HSG47
• The theory of locating services
• Range of Modes
• Power
• Radio
• Signal
• AllScan
• Depth Measurements
• Strike Alert
• An outside practical tracing session

Upon successful completion of this course, each delegate will receive a Certificate of Training, valid for 3 Years.

Duration:  1/2 Day

Our NPORS CAT and Genny Training N304 Course is designed to teach up to a maximum of 8 delegates, providing the essential knowledge needed to safely and correctly operate a Cable Avoidance Tool (CAT) along with a Signal Generator (GENNY) when tracing underground services to meet the guidance from HSG 47 for Avoiding Danger from Underground Services.

Who Should Attend

The CAT & Genny Course is intended for those who operate, supervise or manage the use of Cable Avoidance Tools and Signal Generators in the workplace to avoid the dangers of underground services. There are no prerequisites for this course, although an understanding of underground services, utility plans and cable avoidance tools are an advantage.

Since the safe use of cable avoidance tools require that delegates consult safety notices and read and thoroughly understand the manufacturer’s instruction manual, English literacy and language comprehension are important requirements for any user.

Course Programme

• The reasons for using locators
• Safety
• Plans
• HSG47
• The theory of locating services
• Range of Modes
• Power
• Radio
• Signal
• AllScan
• Depth Measurements
• Strike Alert
• An outside practical tracing session

Upon successful completion of this course, each delegate will receive a Certificate of Training, valid for 3 Years.

Duration:  1/2 Day

Our NPORS CAT and Genny Training N304 Course is designed to teach up to a maximum of 8 delegates, providing the essential knowledge needed to safely and correctly operate a Cable Avoidance Tool (CAT) along with a Signal Generator (GENNY) when tracing underground services to meet the guidance from HSG 47 for Avoiding Danger from Underground Services.

Who Should Attend

The CAT & Genny Course is intended for those who operate, supervise or manage the use of Cable Avoidance Tools and Signal Generators in the workplace to avoid the dangers of underground services. There are no prerequisites for this course, although an understanding of underground services, utility plans and cable avoidance tools are an advantage.

Since the safe use of cable avoidance tools require that delegates consult safety notices and read and thoroughly understand the manufacturer’s instruction manual, English literacy and language comprehension are important requirements for any user.

Course Programme

• The reasons for using locators
• Safety
• Plans
• HSG47
• The theory of locating services
• Range of Modes
• Power
• Radio
• Signal
• AllScan
• Depth Measurements
• Strike Alert
• An outside practical tracing session

Upon successful completion of this course, each delegate will receive a Certificate of Training, valid for 3 Years.

Duration:  1/2 Day

Our NPORS CAT and Genny Training N304 Course is designed to teach up to a maximum of 8 delegates, providing the essential knowledge needed to safely and correctly operate a Cable Avoidance Tool (CAT) along with a Signal Generator (GENNY) when tracing underground services to meet the guidance from HSG 47 for Avoiding Danger from Underground Services.

Who Should Attend

The CAT & Genny Course is intended for those who operate, supervise or manage the use of Cable Avoidance Tools and Signal Generators in the workplace to avoid the dangers of underground services. There are no prerequisites for this course, although an understanding of underground services, utility plans and cable avoidance tools are an advantage.

Since the safe use of cable avoidance tools require that delegates consult safety notices and read and thoroughly understand the manufacturer’s instruction manual, English literacy and language comprehension are important requirements for any user.

Course Programme

• The reasons for using locators
• Safety
• Plans
• HSG47
• The theory of locating services
• Range of Modes
• Power
• Radio
• Signal
• AllScan
• Depth Measurements
• Strike Alert
• An outside practical tracing session

Upon successful completion of this course, each delegate will receive a Certificate of Training, valid for 3 Years.

Duration:  1/2 Day

Our NPORS CAT and Genny Training N304 Course is designed to teach up to a maximum of 8 delegates, providing the essential knowledge needed to safely and correctly operate a Cable Avoidance Tool (CAT) along with a Signal Generator (GENNY) when tracing underground services to meet the guidance from HSG 47 for Avoiding Danger from Underground Services.

Who Should Attend

The CAT & Genny Course is intended for those who operate, supervise or manage the use of Cable Avoidance Tools and Signal Generators in the workplace to avoid the dangers of underground services. There are no prerequisites for this course, although an understanding of underground services, utility plans and cable avoidance tools are an advantage.

Since the safe use of cable avoidance tools require that delegates consult safety notices and read and thoroughly understand the manufacturer’s instruction manual, English literacy and language comprehension are important requirements for any user.

Course Programme

• The reasons for using locators
• Safety
• Plans
• HSG47
• The theory of locating services
• Range of Modes
• Power
• Radio
• Signal
• AllScan
• Depth Measurements
• Strike Alert
• An outside practical tracing session

Upon successful completion of this course, each delegate will receive a Certificate of Training, valid for 3 Years.

Duration:  1/2 Day

Our NPORS CAT and Genny Training N304 Course is designed to teach up to a maximum of 8 delegates, providing the essential knowledge needed to safely and correctly operate a Cable Avoidance Tool (CAT) along with a Signal Generator (GENNY) when tracing underground services to meet the guidance from HSG 47 for Avoiding Danger from Underground Services.

Who Should Attend

The CAT & Genny Course is intended for those who operate, supervise or manage the use of Cable Avoidance Tools and Signal Generators in the workplace to avoid the dangers of underground services. There are no prerequisites for this course, although an understanding of underground services, utility plans and cable avoidance tools are an advantage.

Since the safe use of cable avoidance tools require that delegates consult safety notices and read and thoroughly understand the manufacturer’s instruction manual, English literacy and language comprehension are important requirements for any user.

Course Programme

• The reasons for using locators
• Safety
• Plans
• HSG47
• The theory of locating services
• Range of Modes
• Power
• Radio
• Signal
• AllScan
• Depth Measurements
• Strike Alert
• An outside practical tracing session

Upon successful completion of this course, each delegate will receive a Certificate of Training, valid for 3 Years.

Duration:  1/2 Day

Our NPORS CAT and Genny Training N304 Course is designed to teach up to a maximum of 8 delegates, providing the essential knowledge needed to safely and correctly operate a Cable Avoidance Tool (CAT) along with a Signal Generator (GENNY) when tracing underground services to meet the guidance from HSG 47 for Avoiding Danger from Underground Services.

Who Should Attend

The CAT & Genny Course is intended for those who operate, supervise or manage the use of Cable Avoidance Tools and Signal Generators in the workplace to avoid the dangers of underground services. There are no prerequisites for this course, although an understanding of underground services, utility plans and cable avoidance tools are an advantage.

Since the safe use of cable avoidance tools require that delegates consult safety notices and read and thoroughly understand the manufacturer’s instruction manual, English literacy and language comprehension are important requirements for any user.

Course Programme

• The reasons for using locators
• Safety
• Plans
• HSG47
• The theory of locating services
• Range of Modes
• Power
• Radio
• Signal
• AllScan
• Depth Measurements
• Strike Alert
• An outside practical tracing session

Upon successful completion of this course, each delegate will receive a Certificate of Training, valid for 3 Years.

Duration:  1/2 Day

Our NPORS CAT and Genny Training N304 Course is designed to teach up to a maximum of 8 delegates, providing the essential knowledge needed to safely and correctly operate a Cable Avoidance Tool (CAT) along with a Signal Generator (GENNY) when tracing underground services to meet the guidance from HSG 47 for Avoiding Danger from Underground Services.

Who Should Attend

The CAT & Genny Course is intended for those who operate, supervise or manage the use of Cable Avoidance Tools and Signal Generators in the workplace to avoid the dangers of underground services. There are no prerequisites for this course, although an understanding of underground services, utility plans and cable avoidance tools are an advantage.

Since the safe use of cable avoidance tools require that delegates consult safety notices and read and thoroughly understand the manufacturer’s instruction manual, English literacy and language comprehension are important requirements for any user.

Course Programme

• The reasons for using locators
• Safety
• Plans
• HSG47
• The theory of locating services
• Range of Modes
• Power
• Radio
• Signal
• AllScan
• Depth Measurements
• Strike Alert
• An outside practical tracing session

Upon successful completion of this course, each delegate will receive a Certificate of Training, valid for 3 Years.

Duration:  1/2 Day

Our NPORS CAT and Genny Training N304 Course is designed to teach up to a maximum of 8 delegates, providing the essential knowledge needed to safely and correctly operate a Cable Avoidance Tool (CAT) along with a Signal Generator (GENNY) when tracing underground services to meet the guidance from HSG 47 for Avoiding Danger from Underground Services.

Who Should Attend

The CAT & Genny Course is intended for those who operate, supervise or manage the use of Cable Avoidance Tools and Signal Generators in the workplace to avoid the dangers of underground services. There are no prerequisites for this course, although an understanding of underground services, utility plans and cable avoidance tools are an advantage.

Since the safe use of cable avoidance tools require that delegates consult safety notices and read and thoroughly understand the manufacturer’s instruction manual, English literacy and language comprehension are important requirements for any user.

Course Programme

• The reasons for using locators
• Safety
• Plans
• HSG47
• The theory of locating services
• Range of Modes
• Power
• Radio
• Signal
• AllScan
• Depth Measurements
• Strike Alert
• An outside practical tracing session

Upon successful completion of this course, each delegate will receive a Certificate of Training, valid for 3 Years.

Duration:  1/2 Day

Our NPORS CAT and Genny Training N304 Course is designed to teach up to a maximum of 8 delegates, providing the essential knowledge needed to safely and correctly operate a Cable Avoidance Tool (CAT) along with a Signal Generator (GENNY) when tracing underground services to meet the guidance from HSG 47 for Avoiding Danger from Underground Services.

Who Should Attend

The CAT & Genny Course is intended for those who operate, supervise or manage the use of Cable Avoidance Tools and Signal Generators in the workplace to avoid the dangers of underground services. There are no prerequisites for this course, although an understanding of underground services, utility plans and cable avoidance tools are an advantage.

Since the safe use of cable avoidance tools require that delegates consult safety notices and read and thoroughly understand the manufacturer’s instruction manual, English literacy and language comprehension are important requirements for any user.

Course Programme

• The reasons for using locators
• Safety
• Plans
• HSG47
• The theory of locating services
• Range of Modes
• Power
• Radio
• Signal
• AllScan
• Depth Measurements
• Strike Alert
• An outside practical tracing session

Upon successful completion of this course, each delegate will receive a Certificate of Training, valid for 3 Years.

Duration:  1/2 Day

Our NPORS CAT and Genny Training N304 Course is designed to teach up to a maximum of 8 delegates, providing the essential knowledge needed to safely and correctly operate a Cable Avoidance Tool (CAT) along with a Signal Generator (GENNY) when tracing underground services to meet the guidance from HSG 47 for Avoiding Danger from Underground Services.

Who Should Attend

The CAT & Genny Course is intended for those who operate, supervise or manage the use of Cable Avoidance Tools and Signal Generators in the workplace to avoid the dangers of underground services. There are no prerequisites for this course, although an understanding of underground services, utility plans and cable avoidance tools are an advantage.

Since the safe use of cable avoidance tools require that delegates consult safety notices and read and thoroughly understand the manufacturer’s instruction manual, English literacy and language comprehension are important requirements for any user.

Course Programme

• The reasons for using locators
• Safety
• Plans
• HSG47
• The theory of locating services
• Range of Modes
• Power
• Radio
• Signal
• AllScan
• Depth Measurements
• Strike Alert
• An outside practical tracing session

Upon successful completion of this course, each delegate will receive a Certificate of Training, valid for 3 Years.

Duration:  1/2 Day

Our NPORS CAT and Genny Training N304 Course is designed to teach up to a maximum of 8 delegates, providing the essential knowledge needed to safely and correctly operate a Cable Avoidance Tool (CAT) along with a Signal Generator (GENNY) when tracing underground services to meet the guidance from HSG 47 for Avoiding Danger from Underground Services.

Who Should Attend

The CAT & Genny Course is intended for those who operate, supervise or manage the use of Cable Avoidance Tools and Signal Generators in the workplace to avoid the dangers of underground services. There are no prerequisites for this course, although an understanding of underground services, utility plans and cable avoidance tools are an advantage.

Since the safe use of cable avoidance tools require that delegates consult safety notices and read and thoroughly understand the manufacturer’s instruction manual, English literacy and language comprehension are important requirements for any user.

Course Programme

• The reasons for using locators
• Safety
• Plans
• HSG47
• The theory of locating services
• Range of Modes
• Power
• Radio
• Signal
• AllScan
• Depth Measurements
• Strike Alert
• An outside practical tracing session

Upon successful completion of this course, each delegate will receive a Certificate of Training, valid for 3 Years.

Duration:  1/2 Day

Our NPORS CAT and Genny Training N304 Course is designed to teach up to a maximum of 8 delegates, providing the essential knowledge needed to safely and correctly operate a Cable Avoidance Tool (CAT) along with a Signal Generator (GENNY) when tracing underground services to meet the guidance from HSG 47 for Avoiding Danger from Underground Services.

Who Should Attend

The CAT & Genny Course is intended for those who operate, supervise or manage the use of Cable Avoidance Tools and Signal Generators in the workplace to avoid the dangers of underground services. There are no prerequisites for this course, although an understanding of underground services, utility plans and cable avoidance tools are an advantage.

Since the safe use of cable avoidance tools require that delegates consult safety notices and read and thoroughly understand the manufacturer’s instruction manual, English literacy and language comprehension are important requirements for any user.

Course Programme

• The reasons for using locators
• Safety
• Plans
• HSG47
• The theory of locating services
• Range of Modes
• Power
• Radio
• Signal
• AllScan
• Depth Measurements
• Strike Alert
• An outside practical tracing session

Upon successful completion of this course, each delegate will receive a Certificate of Training, valid for 3 Years.

Duration:  1/2 Day